Enhancement of multioctave dynamic range in a push-pull modulated analog photonic link

We demonstrate an analog photonic link with a high multioctave spurious-free dynamic range (SFDR) using a push-pull modulation technique of laser diodes combined with a balanced detection scheme. SFDR enhancements ranging from 5 dB to 18 dB, relative to the case of a single arm link, have been obtained in a frequency range of 2.5 GHz to 3.2 GHz

Ring resonator-based Tunable Optical Delay Line in LPCVD Waveguide Technology

Optical circuits providing a time delay to signals modulated on optical carriers are considered important for optical communication systems and phased array antennas. A continuously tunable optical delay line is demonstrated in low-cost CMOS compatible LPCVD planar waveguide technology. The device consists of three cascaded ringresonator all-pass filters with fixed circumference of 2 cm (delay of 0.12 ns and FSR of 8.4 GHz). The measured group delay ranges from 0 ns up to 1.2 ns with a bandwidth of 500 MHz and delay ripple smaller than 1 ps, which is in accordance with the calculations

Ring resonator-based single-chip 1x8 optical beam forming network in LPCVD waveguide technology

Optical ring resonators (ORRs) are good candidates to provide continuously tunable delay in beam forming networks (BFNs) for phased array antenna systems. \ud Delay and splitting/combining elements can be integrated on a single optical chip to form an OBFN. A state-of-the-art 1×8 OBFN chip has been fabricated in LPCVD waveguide technology.\ud It is designed with 1 input and 8 outputs, between which a binary-tree topology is used. A different number of ORRs (up to 7) are cascaded for each output.\ud In this paper, the principle of operation is explained and demonstrated by presenting measurements on the 1×8 OBFN chip

Optical beam forming for phased-array antennas

The activities of the Telecommunication Engineering (TE) group span the communications spectrum from copper cables, optical fibres, microwaves, radio and electromagnetic compatibility. Our research concentrates on optical signal processing and networks, mobile communications, microwave techniques and radiation from ICs and PCBs [1]. A considerable (and particularly interesting) part of it is related to optical beam forming for phased array antennas, using optical ring resonators.\ud In this article the theoretical basics and practical challenges of this interesting research topic will be summarized.\u

Phased array antenna steering using a ring resonator-based optical beam forming network

A novel beam steering mechanism for a phased array antenna receiver system is introduced. The core of the system is a ring resonator-based integrated optical beam forming network chip. Its principles are explained and demonstrated by presenting some measurement results. The system architecture around the chip is based on a combination of frequency down conversion, filter-based optical single sideband modulation and balanced coherent detection. It is proven that such an architecture has significant advantages with respect to a straightforward architecture using double sideband modulation and direct detection, namely relaxed bandwidth requirements on the optical modulators and detectors, reduced complexity and optical losses of the beam forming chip, and enhanced dynamic range

A Chandra Proper Motion for PSR J1809-2332

We report on a new Chandra exposure of PSR J1809-2332, the recently discovered pulsar powering the bright EGRET source 3EG J1809-2328. By registration of field X-ray sources in an archival exposure, we measure a significant proper motion for the pulsar point source over an ~11 year baseline. The shift of 0.30+/-0.06" (at PA= 153.3+/-18.4) supports an association with proposed SNR parent G7.5-1.7. Spectral analysis of diffuse emission in the region also supports the interpretation as a hard wind nebula trail pointing back toward the SNR.Comment: To Appear in the Astrophysical Journal, Sept 1 (v. 756

Rings and Jets around PSR J2021+3651: the `Dragonfly Nebula'

We describe recent Chandra ACIS observations of the Vela-like pulsar PSR J2021+3651 and its pulsar wind nebula (PWN). This `Dragonfly Nebula' displays an axisymmetric morphology, with bright inner jets, a double-ridged inner nebula, and a ~30" polar jet. The PWN is embedded in faint diffuse emission: a bow shock-like structure with standoff ~1' brackets the pulsar to the east and emission trails off westward for 3-4'. Thermal (kT=0.16 +/-0.02 keV) and power law emission are detected from the pulsar. The nebular X-rays show spectral steepening from Gamma=1.5 in the equatorial torus to Gamma=1.9 in the outer nebula, suggesting synchrotron burn-off. A fit to the `Dragonfly' structure suggests a large (86 +/-1 degree) inclination with a double equatorial torus. Vela is currently the only other PWN showing such double structure. The >12 kpc distance implied by the pulsar dispersion measure is not supported by the X-ray data; spectral, scale and efficiency arguments suggest a more modest 3-4 kpc.Comment: 22 pages, 5 figures, 3 tables, Accepted to Ap

Optical phase synchronization in coherent optical beamformers for phased array receive antennas

An optical phase synchronization system using a power feedback loop technique is experimentally demonstrated. The system allows coherent combining of signals modulated on the same optical carrier in a hybrid optical beam forming system setup

Novel ring resonator-based optical beamformer system and experimental results

A novel squint-free, continuously tunable beamformer mechanism for a phased array antenna system is proposed. It consists of filter-based optical single-sideband suppressed-carrier modulation, a fully integrated optical beam forming network using cascades of optical ring resonators as tunable delay elements, and balanced coherent optical detection. The proposed system brings advantages in optical bandwidth requirement, system complexity, and dynamic range, without introducing the problem of beam squint or limited tuning resolution. Some experimental results are presented in order to demonstrate the feasibility of the proposed concept